 |
MT9 MIDI to Trigger / Gate converterInputs: Outputs: Power supply: Controls: Indicators: Size: |
Introduction
The MT9 is a MIDI to triggering module. It allows triggering of a range of analogue devices; drum voice modules, envelope modules, analogue sequencers, analogue drum machines, and anything else with a gate, trigger or clock input.
It has 9 separate 5v trigger outputs, so 9 devices can be independently triggered via separate MIDI keys. There is also an ACCent output.
Use
Connecting
Connect the MIDI sequencer or other MIDI device to the MIDI input of the MT9. Connect MT9 trigger outputs to device you wish to trigger.
Programming
Programming the MT9 is a very simple proceedure.
Press and hold the PROGRAM button. Then press a MIDI key.
The MT9 will set its MIDI receive channel (which will be the same for all outputs) to the MIDI channel the keyboard is transmitting on.
The outputs are pre-assigned, output T1 starting at middle C.
ACCENT
The ACC is an on (5v) / off (0v) output. When velocity of over 80 is received for any of the 9 triggers, then the Accent will go high (5v). Lower than 80 the output will go low (0v). Use this output to control other analogue modules.
Note: it is not directly compatible with the drum module ACC inputs. The naming of this socket is perhaps misleading if you use our drum modules. The drum modules require a different type of accent signal; 12v on, about 5v off. We may (or may not) make an 'Accent' add-on module.
Concussor
Modular Synthesizer from Analogue Solutions
Tel:+44 1384 35 36 94 Fax:+44 1384 35 36 94
e&oe (c) 8 2008
