ATT4 - Quad (4x) Attenuator
Inputs:
Signal In x4
Outputs:
Signal Out x4
Power:
n/a
Controls:
Signal Level x4
Size:
12HP
Introduction
4 attenuators.
Four independent attenuators (level controls) in one module. Attenuators are passive controls (they use no power) that are used to decrease the level of an audio or CV signal.
The signal can be changed from full level right down to zero. Use anytime you need to decrease the level of a signal.
A typical example is in conjunction with our MX61 6 input mixer. As this mixer does not have level controls, you can use the attenuators of the ATT4 to adjust the levels before they are mixed with the MX61.
Controls In Detail
The 4 Attenuators are identical.
LEVEL (1-4)
Alters the input signal level
Sockets In Detail
IN (1-4)
Attenuator input.
OUT (1-4)
Output from attenuator.
Concussor Modular Synthesizer
from Analogue Solutions
Tel:+44 1384 35 36 94 Fax:+44 1384 35 36 94
e&oe (c) 8 2005
