 |
price guide to Concussor Modular Synthesiser |
|
price guide to Concussor Modular Synthesiser |
KEY FEATURES OF CONCUSSOR MODULES
Pure analogue voice circuitry.
Compatible with many other systems, like Doepfer, & others with power cable adaptation, like Analogue Systems Integrator
Physically the same format as Doepfer A100 (DIN standard)
Clearly labelled functions.
Most modules have something extra you don't normally get, e.g. VCOs all have Glide (portamento), Filters all have VCAs, etc.
Alternative modules available not seen else where.
NOTE: some modules require 5V! If you're using a Doepfer case with no 5V, some modules won't work - in which case buy Doefper's 5V option!! (Our cases have 5v as standard). Some 5v modules are SQ8, GT8, VCO-SUB, BD88. It's always best to read the manual before emailing with any problems.
Manual |
DOWNLOAD |
| £ Price | £ see listings (exc. tax and delivery) |
| Stock? | Yes |
 Sound demosMP3 & WMA format - unprocessed samples. |
demos1 demos2 demos2 demos4 |
| WEIGHT & SIZE | |
Name |
Description |
Details |
Controls |
Sockets |
Prices exc. VAT |
|
Percussion Voices |
||||||
|
Bass / Conga / Bongo Drum Width 10HP |
- Based on the CR78 bass drum. Provides a wide range of truly early electronic kick sounds. The tune control allows Conga/Bongo sounds to also be produced. |
Tune, Decay, Level |
Trigger, Audio out (3.5mm & 6.35mm) |
£49 |
|
|
Bass Drum Width 10HP |
- Based on the legendary TR808 bass drum. The tune range has been increased enabling Tom/Conga sounds to also be produced. |
Tune, Tone, Decay, Level |
Accent, Trigger, Audio out (3.5mm & 6.35mm) |
£59 |
|
|
Bass / Elec.Tom Drum Width 10HP |
- Based on the legendary TR909 bass drum. The addition of a tune control allows a wide range of sounds including Electronic Tom sound. The inclusion of a pitch CV input allows the drum to be 'played' via MIDI-CV converter, or if modulated by say a VCO, new waveforms can be synthesised. |
Sweep, Tune, Attack, Decay, Level |
Accent, Trigger, CV, Audio out (3.5mm & 6.35mm) |
£89 |
|
|
Snare Drum Width 10HP |
- Based on the CR78 snare drum. Provides a wide range of truly early electronic snare sounds. |
Tune, Snappy, Level |
Trigger, Audio out (3.5mm & 6.35mm) |
£49 |
|
|
Snare Drum Width 10HP |
- Based on the legendary TR808 snare drum. With the addition of extra controls a very wide range of snare type sounds can be produced. |
Tone, Snappy, Decay, Filter, Level |
Accent, Trigger, Noise Out, Audio out (3.5mm & 6.35mm) |
£59 |
|
|
Snare Drum Width 10HP |
- Based on the legendary TR909 snare drum. The tune range has been increased, and with the additional controls a wide range of snare sounds can be produced. The inclusion of a pitch CV input allows the drum to be 'played' via MIDI-CV converter, or if modulated by say a VCO, new waveforms can be synthesised. |
Tune, Tone, HPF, Snappy, Level |
Accent, Trigger, CV, Audio out (3.5mm & 6.35mm) |
£99 |
|
|
Dual HiHat - 2 drum sounds in 1 module - OPEN and CLOSED hihats Width 10HP |
- Based on the TR808 Hihat sounds. Both open and closed sounds are provide. When played together the 'muted' sound is obtained. The inclusion of a tune control allows greater variation in sound. A 'Source' audio output provides the raw waveforms for external use and processing. |
Tune, CH Decay, CH Level, OH Decay, OH Level |
CH Accent, CH Trigger, OH Accent, OH Trigger, CH Audio out, OH Audio out, Source out |
£99 |
|
|
Cowbell Width 10HP |
- Based on the TR808 Cowbell sound. With the addition of 3 controls a very wide range of sounds can be produced, not just Cowbell. By tuning the 2 oscillators together, tonal sounds can be produced from bass right up to the top end. |
Tune 1, Tune 2, Decay, Level |
Accent, Trigger, Source out, Audio out (3.5mm & 6.35mm) |
£49 |
|
| TM88 |
 |
Tom Tom Width 10HP |
- Based on the TR808 Tom Tom sound. With the addition of 1 control a very wide range of sounds can be produced, not just Toms.
|
Tune, Noise, Level
|
Accent, Trigger, Source out, Audio out (3.5mm & 6.35mm) | £49
|
| CG88 |
 |
Conga Width 10HP |
- Based on the TR808 Conga sound.
|
Tune, Level
|
Accent, Trigger, Source out, Audio out (3.5mm & 6.35mm) | £49
|
| RS88 |
|
Rim Shot Width 10HP |
- Based on the TR808 Rimshot sound.
|
Tune, Filter, Level
|
Accent, Trigger, Source out, Audio out (3.5mm & 6.35mm) | £49
|
| CL88 |
|
Claves Width 10HP |
- Based on the TR808 Claves sound.
|
Tune, Level
|
Accent, Trigger, Source out, Audio out (3.5mm & 6.35mm) | £49
|
Synthesiser Modules |
||||||
 |
Multimode filter
& Width 18HP |
- Filter module based on the popular MS20 filter section. With the addition of built in VCA. SY02 has both LPF and HPF with separate cut-off and resonance controls. Used together Band Pass filtering is obtained. Input levels and Resonance can be overdriven for exciting side effects. |
Input Level, HPF Cut-Off, HPF Resonance, HPF CV, LPF Cut-Off, LPF Resonance, LPF CV, Level |
Audio In, HPF CV, LPF CV, VCF Out, VCA In, VCA CV, VCA Out |
£99 | |
| SY03 |
 |
Voltage controlled low pass
filter & VCA in one module. Width 12HP
|
Filter based on the popular Moog type filter. Sound fat and powerful. Resonance can fully feedback. Also has a VCA too! | Signal1 Level, CV1 Level, Cut Off, Resonance, VCA CV Level. | Signal 1 and 2 inputs, CV 1 and 2 inputs, VCA CV input, Signal Output. | £79 |
| SY04 |
picture soon |
Voltage controlled low pass
filter & VCA in one compact module. Width 6HP
|
A cut-down versions of the SY03 module in a compact 6HP size. | Cut Off, Resonance | Signal 1 and 2 inputs, CV 1 and 2 inputs, VCA CV input, Signal Output. | £69 |
| VCO 6HP |
 |
VCO Width 6HP |
Small sized stable VCO. | Tune, Square Level | CV In, PW In, Saw Out, Square Out | £69 |
| VCO |
 |
VCO Width 12HP |
The VCO has the benefit of Glide (portamento) built in as standard and also features PW control, Sync In and separate Saw and Square outs. | Tune, Glide, PW, Saw Level, Square Level | CV In, PW In, Sync In, Saw Out, Square Out | £69 |
| VCO-SUB |
 |
High-end VCO with Sub outputs Width 12HP |
The VCO has the benefit of Glide (portamento) built in as standard and also features PW control, Sync In and separate Saw and Square outs. | Tune, Glide, PW, Saw Level, Square Level | CV In, PW In, Sync In, Saw Out, Square Out, 3x Sub VCO outs | £79 |
| VCO-RM |
 |
High-end VCO with separate Ring Modulator Width 12HP |
The VCO has the benefit of Glide (portamento) built in as standard and also features PW control, Sync In and separate Saw and Square outs. | Tune (with Octave switch), Glide, Triangle Level, Saw Level, Square Level | CV In, Sync In, Tri Out, Saw Out, Square Out, RM X In, RM Y In, RM Out | £89 |
| LFO-NZ |  |
Voltage Controlled LFO with separate Noise output Width 6HP
|
LFO with 4 waveforms: ramp, reverse ramp, square and trianlge. The 4 waves share 2 outputs. Selection is via 2 push/pull switches built into the level pots. Frequency is Voltage Controlled. There is a separate noise output | Speed, Ramp/Rev.Ramp Level (switch), Triangle/Square Level (switch).
|
Ramp/Rev.Ramp out, Triangle/Square out, Speed/Frequency CV In, Noise out
|
£69 |
| LFO2 |
 |
Simple LFO Width 6HP
|
LFO with 2 waveforms: triangle and square | Speed, Tri Level, Square Level. | Triangle out, Square out | £59 |
| SH-NZ |  |
Sample and Hold unit with slew control. Also has an independant noise generator Width 6HP |
Slew, Noise level, SH clock LED |
Noise out, SH signal in, SH clock in, SH clock out |
£59 | |
| EG |
 |
ASR Envelope Generator Width 6HP
|
Attack, Sustain, Sustain on/off switch, Trig LED
|
EG has Trig In, + Out | £59 | |
| EG01 |  |
Envelope Generator with EMS-style repeats Width 12HP |
ADSR envelope. Positive output, variable negative to positive output. |
EG has A, D, S, R and Level (push pull switch to select - to +) EG also has and EMS-style Repeat function (when sustain set to zero and key held down) - this is an easy to use and powerful feature. |
EG has Trig In, + Out, - to + (variable) Out. | £69 |
| VCA2 |
 |
2 Independent VCAs Width 12HP
|
2 VCAs both with attenuators | Both have CV and output level, VCA 1 also has input
level
|
£59 | |
| RM |
 |
Ring Modulator
Width 6HP
|
2 inputs, 1 ring mod out
|
£ | ||
| HP01 |
 |
Mixer / Headphone pre-amp
Width 6HP |
3 channel 1:1 mixer, with 1/4" jack output and headphone pre-amp output | There is an attenuator that controls both the phones and main output | 3 line inputs on 3.5mm
jack, 1 stereo phones 6.35mm Jack 1 Main Output 6.35mm Jack |
£59 |
Sequencing & Control Modules |
||||||
| MCV |
 |
MIDI to CV converter Width 6HP |
Pitch and auxiliary CVs, 16 bit conversion, pitch bend, very stable, accurate DAC |
Program and Trig LED | CV1 out, CV2 out, Gate out | £79 |
| M2CV |  |
MIDI to CV converter Width 12HP |
pitch and auxiliary CVs, 16 bit conversion, pitch bend, accent and legato outputs. very stable, accurate DAC |
Program and Manual Trigger buttons | CV1 out, CV2 out, Gate out, Accent out, Legato out | £109 |
 |
9 channel + Accent Width 10HP |
A 9 channel + accent MIDI to Gate/Trigger converter. Ideal for triggering drum modules, envelopes and sequencers from MIDI notes. Output is a Gate (MIDI note length information is retained) but can also be used with devices that use Triggers. |
Program button |
MIDI In, MIDI Thru, 9 Gate/Trigger outputs, Accent output, trigger LED |
£69 | |
 |
Analogue Sequencer CV and
Gate sequencer Width 18HP |
8x CV controls, with integral Gate switch, Step button, Range switch (5V/10V). 8x Postition LEDs |
Step 1 out, Reset In, Clock In, Clock Through, CV out, Gate Out |
£99 | ||
 |
Analogue Sequencer. Width 18HP |
8x Gate switches (1/off/2), Step button 8x Postition LEDs |
8x step outputs, Gate 1 Out, Gate 2 Out, Clock Input, Reset Input |
£99 | ||
| Oberkorn3 |
 |
Ultimate multi-channel, 16 step sequencer.Plenty of original, new creative features. | Manual | 3xCV 5xGate Clock Unique reset modes Unique programming modes |
£419 inc. case/PSU | |
| SL16 |
 |
16 step single channel version of Oberkorn analog sequencer, with sliders. 2x Gate outputs. Multiplexer control inputs | £249 (module only) | |||
Utility Modules |
||||||
 |
Mixer: 6 input unity gain CV/Audio/Gate mixer with normal and inverted outputs. Width 4HP |
6x Inputs, Inverted output, normal output |
£39 | |||
 |
Mixer / Buffer / Inverter: 2 input unity gain CV/Audio/Gate mixer with 4 normal and 2 inverted outputs. Width 4HP |
2x Inputs, 2x Inverted outputs, 4x Normal outputs |
£39 | |||
 |
2x 4 or 1x 8 multiple. Width 4HP |
2x 4 or 1x 8 multiple |
£19 | |||
|
picture soon |
2x adaptors - a 3.5mm and a 6.35mm jack sockets wired in series. Ideal to convert mini to big jack. Width 6HP |
£19 | ||||
| ATT4 |
 |
4x passive
attenuators - for level control width 12HP |
4x attenuator level controls | £39 | ||
Cases and Accessories |
||||||
| AS0084 |
 |
84HP plastic case with PSU PCB | Ideal for a small system |
£119 | ||
| AS1600 |  |
6U
aluminium rack mount case with PSU (new case is silver colour) |
£260 |
|||
| CV leads |
 |
1.2M mini-jack leads, black, each | £2.50 each |
|||
| CV leads |
|
60cm mini-jack leads, YELLOW only | £2.50 each |
|||
| Adaptors |  |
3.5mm socket to 6.35mm plug adaptor | £2.50 | |||
|
||||||
| PSU | 15V AC 500mA PSU for Sermblance, Telemark, Oberkorn, TBX303. EU or UK versions | £9 |
||||
All prices are in GBP Pounds Sterling and exclude VAT. Prices apply to UK customers. For your local price contact your dealer. Modules come with a power lead (Doepfer style) and instructions. Screws are not supplied. Delivery extra. Specifications & prices subject to change without notice.
Specifications & prices subject to change without notice.
Concussor Modular Synthesizer
from Analogue Solutions
Tel:+44 1384 35 36 94 Fax:+44 1384 35 36 94
e&oe (c) 11 2009
