Concussor Modular Synthesizer from Analogue Solutions
Tel:+44 1384 35 36 94 Fax:+44 1384 35 36 94
e&oe (c) 5 2005
Do not overload your power supply!
Concussor has 3 power rails: -12v, +5v, +12v. Not all modules use the +5v rail. The total current consumption of all the modules' use on each rail must not exceed the total the power supply can deliver.
The Concussor power supply gives out about 1A per rail, but keep it as low as possible to extend the power supply's lifetime. (The hotter the regulators run the quicker it will age and be more likely to fail!).
Power supplies are much more complicated than you could possibly imagine.
But, the Concussor power board (AS1600 case) will easily power a full 6U rack of Concussor modules in any combination, so don't worry about this page!
The following table is to be used as a guide only;
| MODULE | -12v | +5v | +12v | +12v with LED on | Note |
| CB88 | 4mA | 0.5mA | 4mA | 12mA | |
| EG01 | 9mA | - | 10mA | 23mA | |
| VCO-RM | 30mA | - | 50mA | - | |
| VCO-SUB | 20mA | - | 20mA | ||
We will complete this table as we get time to measure the rest of the modules. But you will find the other drum modules will measure similar to the other drums, likewise the other synth modules will measure similar to the VCO.
Concussor
Modular Synthesizer from Analogue Solutions
Tel:+44 1384 35 36 94 Fax:+44 1384 35 36 94
e&oe (c) 5 2005
