round up of all TR606 modifications
............................................................
TR606 Internal MIDI Mod - also available for CR78, CR8000, TR808 and most other drum machines (prices vary) completely internal MIDI to Trigger mod. Provides MIDI triggering of all sounds, and also Accent. Comprises: MIDI In, optional MIDI Thru, program switch. MIDI channel can be selected. Note assignment is fixed. Cheaper and over 1/2 the price of using an external MIDI converter! AVAILABLE NOW |
Kit: £79 |
Fitted
£119 |
 |
| TR606 Tonal Mod with metal silk screened front panel! This box is permanently attached via ribbon cable. It gives you 13 rotary controls allowing radical changing of the sounds. Original sounds can be reproduced. This box extends the life of your TR606 the ability to create new sounds ** Note we can also fit this box to the right hand side - please state this choice when ordering. ** If you are ordering the MIDI kit too, it is better to fit the MIDI inside this box!!
BD; Tune1, Tune2. |
Kit: £99 |
Fitted
£119 |
 This pic shows standard tonal mod with box attached at the rear.
AUDIO LOOP 2 (both mp3) notes; the snappy pot crackles when turned and there may be a tiny amount of bleed through between some sounds as it is not practical to use 32 individually screened cables. |
| TR-606
Separate Audio Outputs 5 separate audio outs. Split outputs allow you to send individual signals to their own mixer / effects channel for individual processing. The output level is fixed, that way the individual level pots can still be used to control the mix level of all the sounds that will still come out of the Main output. |
Kit: £20 |
Fitted: £50 |
 |
| Click / Noise
Source / HiHat Source Outputs 3 extra sound outputs from your TR606. CLICK: this is the internal timing pulse that plays 16ths. It also partially controls accent, so where any accent is programmed, the Click will play louder. The click can be used dry but sound better as a sound source to which you could apply some filtering or effects. Kraftwerk used a lot of click type percussion. Patch Click to HH with a CV lead and you get an 'echoey HH or CY' sound Note, the pattern is 16ths only. |
Kit: £20 |
Fitted: £38 |
Noise / HH Sources (both mp3) |
| Drumatix
Audio Inputs These are 2 audio inputs. 1 is replaces the snare noise and goes through its filter, the other replaces the hihat source and goes through its filter. Please note the TR606 filter circuits are only designed for the internal sound sources to go through, and are not too good for external sounds. The input is fairly lo-fi, but is ideal for external oscillators and VCOs. |
Kit: £20 |
Fitted: £38 |
| Drumatix
Extra Trigger Outputs The TR606 comes with 2 trigger outputs controlled from the Toms. We can provide an extra 5 outputs that are controlled from the remaining outputs. The trigger pulse is 5V and is unbuffered. |
Kit: £25 |
Fitted £50 |
trig outs go in same position as audio outs. if you want both sets, an alternative position must be found |
| Fine Tune
Tempo Control This provides an extra tempo controlled that allows the tempo to be changed with finer resolution. The pot goes just to the left of the 'TR606' text. |
Kit: £20 |
Fitted: £29 |
| Blue / Coloured LEDs
Give your 606 an individual look with cool blue LEDs We can replace all the LEDs with any colour you like. Yellow, Green, Blue, (Red?!), Clear |
Kit (for
all Blue): £28 Kit (for other colours): £20 |
Fitted
(all blue): £48 Fitted (other colours): £38 |
 |
| Trigger LEDs Not entirely necessary, but I think the more LEDs you have the better! You get 7 coloured LEDs to indicate trigger activity of all sounds. Though accent does not have its own LED, the individual LEDs will light brighter when an accent is programmed. The LEDs go in a line below the level pots. BD/SD Yellow, Toms Red, CY/HH Green |
Kit: £20 |
Fitted: £38 |
 |
| Internal CMOS
Battery Back Up Internal battery back-up for the CMOS RAM (pattern memory). The large chunky batteries are no longer needed to store pattern date, though they can still be used if you do not want to use a wall adaptor to power the TR606 itself. The internal battery has a long life span of many years meaning you no longer have to worry about losing your precious patterns. |
Kit: £20 |
Fitted: £38 |
| Button
Replacement The programming buttons can wear out resulting in total non-function, intermittant or double trigger behaviour. We can replace all buttons with new buttons as supplied by Roland themselves |
Kit: £39 |
Fitted: £79 |
All the mod's can be fitted to the same machine, but note that some kits use the same space in the case for fitting the sockets. If we are fitting the modification, we will find alternative holes, fi you buy the kit, you must do some investigative work to find alternative socket positions if necessary, though we can help with suggestions.
| MIDI SYNC
We cannot provide internal MIDI Sync conversion (yet), but we can pride an external device such as MDS or Pro2000 |
more mod's as soon as we can think of them. Suggestions?
note; all prices exclude postage and VAT (tax for EC countries). you may get charged import tax if you are not in the EC. we cannot help you or tell you how much this will be, as the rules for each country vary and change. there's a good chance your package will slip through customs with no charges.
CURRENCY CONVERSION
For an estimate of prices in your own currency use Xenon. But note, the conversion is a guide only. The price you will be charged is that we quot in Pounds.What you end up paying is based on the current exchange rate charge by your bank. Your bank may also charge for conversion. If you are paying by card (subject to 5% surcharge) or bank transfer, your bank will do conversion calculation for you.
TO HELP CUSTOMERS INSTALLING THE TONAL MOD: SOME PICTURES FOLLOW...
Shows some tonal mod wiring.
Shows some tonal mod wiring and how to route the cable for side exit.
Shows some tonal mod wiring.
VERY IMPORTNANT IF YOU ARE SENDING US SOMETHING FOR MOD / REPAIR from outside EC:
If you
are shipping us an instument from outside the UK (or EC) for a
repair or modification, you must clearly mark on the shipping
documents and on a letter inside that the instrument is being
sent to us for repair/modification and is to be returned back to
yourself on completion. We do not need to or have to pay import
tax or admin costs (to the courier) on shipments coming to us for
repair/mod. If you fail to mention the above, shipment may be
refused by us or could incur charges.
Most couriers (especially including UPS and FedEx) charge for
what they call 'non-standard entries' - i.e. something that is
only temporarily coming into the country. The charge can be
anything from about £15 up to about £40. This charge is your
responsibility - it is nothing to do with us. Either you will
have to pay it direct, or we can pay it and bill you. There is no
cheap alternative to this.
Note: most packages slip through the system when sent by airmail. UPS and FedEx nearly always charge something in either tax or paperwork. You must always tick the box agreeing you to pay all charges of delivery and tax.
Our advice is to send synths for repair/mod by airmail. Insure and wrap well. Avoid couriers. Try and get the work done by an engineer in your won country.
Concussor Modular Synthesizer
from Analogue Solutions
Tel:+44 1384 35 36 94 Fax:+44 1384 35 36 94
e&oe (c) 6 2008
