SSAR

SSAR - Sealed Self Aligning Rotary-Linear Bearing

[Product Image] 
SSAR Bearing.

SPIRO type SSAR, SAR & SA bearings are self-aligning. This feature is an asset when housing misalignment is inherent in the customer's design. These bearings are made to specification and are of particular interest to designers of special purpose machinery.

The SPIRO principle allows an exceptionally wide combination of rotary and axial movement. The emphasis may be on high rotary speeds coupled with small amounts of linear movement or on slow, intermittent or oscillating rotary movement coupled with extended or rapid linear movement.

When extremely low coefficients of friction are demanded, the slow continual rotation or reciprocation of a SPIRO bearing will eliminate the undesirable characteristic of "Slip-Stick".

Key Benefits

  • Self aligning
    Rotary and Linear motion
    High load bearing capacity

Standard Range (Inch dimensions shown - Metric also available)

(Please contact CPE to discuss specificload bearing requirements)

Part Number

I/D

O/D

Stroke

SSAR150/25

1.500

2.937

0.876

SSAR150/26

1.500

3.875

0.876

SSAR175/27

1.750

3.875

0.876

SSAR212/5

2.125

5.000

1.000

SSAR225/30

2.250

3.875

1.126

SSAR250/31

2.500

4.687

0.876

SSAR262/6

2.625

6.000

0.875

SSAR350/35

3.500

6.000

0.876

SSAR400/40

4.000

7.000

1.250

 

[Home] [About Us] [Products] [Rotolin] [RotolinRange] [Spiro Products] [Exacta] [Buttering Machines] [News]