|
Day 7 |
|
Abbreviations |
|||
|
R |
ring |
- |
picot |
|
SR |
split ring |
Sh1 (Sh2) |
shuttle 1 (shuttle 2) |
|
Cl |
close |
+ |
join |
|
LBP |
long beaded picot |
B |
bead |
|
bttn |
button |
/ |
after / change to Sh2 |
|
vsp |
very small picot |
RW |
reverse work |
|
JR |
Josephine Ring |
DNRW |
do not reverse work |
|
SS |
switch shuttles (use other shuttle) |
SLT |
shoe lace trick (tie knot) |
|
Today's Pattern - please read suggestion section below |
|||
|
I have used italics and red text to indicate where those who prefer to tat 'right side, wrong side' need to start with the second half of the ds first. |
|
|
SR16: 4 / 2 + (7 bead LBP R11) 2 Cl SR17: 4 / 2 + (9 bead LBP R11) 2 Cl SR18: 4 / 2 + (13 bead LBP SR3) 2 Cl SR19: 4 / 2 + (9 bead LBP SR2) 2 Cl SLT RW
R20:
4 + (p R1) 2 + (next hole in button
- see instructions) 3 Cl
SLT RW |
 |
Techniques & Suggestions
| Joining to LBP from second side of SR |
 |
 |
 |
|
Work to the point where join is to be made. |
Remove safety pin and pull a loop of the core thread from the second half of the SR up through the space left by the safety pin. | Take the shuttle you have just been working with on the second side of the SR through the loop just made and close carefully checking that the core thread is still able to move through the SR. Continue with pattern. |