Martindales
& Pill Boxes
Martindales
This instrument
is designed to produce a controlled amount of rubbing between fabric surfaces, at
comparatively low pressures and in continuously changing directions. It is suitable for
testing woven, knitted and other fabric constructions of all weights.
Up to four specimens are tested simultaneously. Each one is prepared and mounted
separately in a holder, so as to expose an area of 6.45 square cms, for testing. The
specimen is backed with Polyurethane foam and is fixed firmly in position. The abradent -
generally a standard white worsted crossbred - fabric is mounted over a woven felt backing
on the abrading tables.
Approximate shipping weights and measurements:
Packing case: 100 x 76 x 70cm
Gross Weight : 150 Kg
Nett Weight: 80 Kg.
Pilling Testers
This tester was
originally designed by Messrs I.C.I. ( Fibres Division ). This machine carries out tests
which are now widely accepted as a standard for determining the pilling tendancies of
knitted and woven fabrics. The two boxes in which the test specimens are
"tumbled" can be either cork or synthetic rubber-lined.
A four box tester is also available.The machine is
fitted with a pre-determined counter which automatically stops the test at a required
number of revolutions.Accessories provided with the machine are eight rubber sample tubes,
sample cutting template and mounting jig, 3 sets of photographic standards of (A) Knitted
or (B) Woven Materials. ( Please state on order A or B
).
Conforms to British Standards and E.C. Regulations C.E. marked.
Special Safety catches are fitted to the hinged door of
each box. Also a quick action, Emergency stop button is fitted.
Supply: 220/240 Volt single phase 50 cycles ( Equipment for other voltages
available )
Packing Case: 103cm x 80cm x 76 cm
Gross Weight: 110Kg.
Pilling Drums Also supplied